Copper (II) complexes of sterically hindered o-diphenol derivatives: synthesis, characterization and microbiological studies

Cu (II) complexes with the sterically hindered diphenol derivatives 3,5-di(tert-butyl)-1,2-benzenediol (I), 4,6-di(tert-butyl)-1,2,3-benzenetriol (II) and the sulfur-containing 4,6-di(tert-butyl)-3-(2-hydroxyethylsulfanyl)-1,2-benzenediol (III) and 2-[4,6-di(tert-butyl)-2,3-dihydroxyphenylsulfanyl]acetic acid (IV) have been synthesized and characterized by elemental analysis, TG/DTA, FT-IR, ESR, XPS, XPD and conductivity measurements. Compounds I–III can coordinate in their singly deprotonated forms and act as bidentate ligands. These compounds yield Cu (II) complexes of the stoichiometry Cu(L)₂, which have square planar geometry (g_| > g_⊥ > g_e). Unlike them, compound IV behaves as a terdentate ligand, and its complex Cu(L^IV)₂ has distorted octahedral geometry. According to ESR data, only the Cu(L^II)₂ complex contains a very small amount of phenoxyl radicals. Antimicrobial activities of these ligands and their respective Cu (II) complexes have been determined with respect to Gram-positive and Gram-negative bacteria, as well as on yeasts. Their phytotoxic properties against Chlorella vulgaris 157 were also examined.     

Time and temperature-based study for the production of high T C phase by sol-gel technique in Pb-bscco system

The high T_C superconducting phase Bi₂Sr₂Ca₂Cu₃Ox (2223) in the Pb-BSCCO system has been produced by EDTA-gel processing using nitrate solutions. The precursor has heated in two stages, at 300 and 800°C each for 2 h, to avoid the burning of the important species involved in the final product. The effects of time (6 to 48 h) and temperature (845 and 855°C) on the formation of the 2223 phase have been studied by sintering the samples in air. Thermal analysis (TG/DTA), X-ray diffraction (XRD), scanning electron microscopy (SEM) and a vibrating sample magnetometer (VSM) have been employed to investigate the powder produced at different stages of decomposition, oxidation and formation of sintered materials from the powders. The volume-fraction of the 2223 phase at 845°C increases with time, the maximum value of the 2223 phase was obtained at 120 h. It has been observed that the formation of the high T_C phase is remarkably enhanced at the temperature of the endothermic peak of the DTA curve. The best result has been obtained in the sample sintered for 24 h at the temperature 855°C (endothermic peak). This also indicated that at 855°C, the large volume-fraction of 2223 phase with T_C 113 K grew in short time and as the sintering time increased, it decomposed into the Bi₂Sr₂CaCu₂Ox (2212) phase and other phases.     

Determination of Glimepiride in Human Plasma by LC-MS-MS and Comparison of Sample Preparation Methods for Glimepiride

A sensitive and selective method for quantitation of glimepiride in human plasma was established using liquid chromatography-electrospray ionization tandem mass spectrometry. Three different methods for the sample preparation of glimepiride and an internal standard were investigated (liquid-liquid extraction, solid-phase extraction and protein precipitation). Glipizide was used as an internal standard. Compounds were separated on a C₁₈ column with 80% acetonitrile and 20% deionized water (adjusted to pH 3.5 with acetic acid), as mobile phase at a flow rate of 200 L min^–1. By use of multiple reaction monitoring mode in MS-MS with liquid-liquid extraction and solid-phase extraction, glimepiride and glipizide were detected without severe interference from the human plasma matrix. Glimepiride produced a protonated precursor ion ([M+H]⁺) at m/z 491 and a corresponding product ion at m/z 352, and the internal standard produced a protonated precursor ion ([M+H]⁺) at m/z 446 and a corresponding product ion at m/z 321. The limit of quantitation was 0.1 ng mL^–1, 0.5 ng mL^–1 and 1.0 ng mL^–1 when using liquid-liquid extraction, solid-phase extraction and protein precipitation, respectively. The validation, reproducibility, stability, and recovery of the different sample preparation methods were comparable and all the methods gave reliable results. The method has been successfully applied to pharmacokinetic study of glimepiride in human plasma.     

Ab initio crystal orbital studies on linear chains of H atoms

Anab initio crystal orbital method is used to calculate the energies of an infinite chain of H atoms and of linear arrangements of H₂ molecules with different interatomic distances. The H₂ arrangements are not stable in respect to isolated molecules. The cohesive energy of an optimized arrangement of H atoms chain is 0.0354 a.u.     

手性锌卟啉对咪唑类客体分子识别的构象研究

Chiral recognition is an attractive subject in the area of host-guest chemistry. Conformation study is performed to understand chiral recognition of zinc(Ⅱ) porphyrin with imidazole derivatives on a molecular level. The molecular recognition of three novel chiral zinc porphyrin(1-3) with four types of imidazole derivatives was studied. The conformation searching of this host-guest system was studied by using simulated annealing method on the basis of Tripos force field. The different minimal energy conformation of imidazole combind with porphyrin was studied. The quantum chemistry calculation was performed to calculate the single-point energies of the host-guest system. The minimal energy conformation of ZnT(o-BocAla)APP (3)-Im showed that Im attaching from the single-side chain of the host had the reasonable configuration than that from the three-side chain. The former also had the lower energy than the latter. And the quantum chemistry calculation results of orbital energy, ΔE_L-H, and atomic net charge revealed the same way. The results illumate that combination oriention of the host-guest system is the single chain of the hosts.     

英国CIE A-level化学教材与人教版高中化学教材中“有机化学”模块的比较研究

以中英2国高中化学教材中的有机化学模块为切入点，对英国CIE A-level化学教材与人教版高中《化学2（必修）》及《有机化学基础（选修5）》在该模块中的课程标准、结构体系、内容选取及组织呈现、栏目设计、典型知识点的编排等方面进行比较，分析英国CIE A-level化学教材的特色和优势。     

Validation and application of a high-performance liquid chromatography/tandem mass spectrometry assay for sumatriptan in human plasma

A sensitive and convenient high-performance liquid chromatography-tandem mass spectrometry(HPLC-MS/MS) assay is described for the (5-HT(lB/lD)) receptor agonist sumatriptan in human plasma. Sumatriptan was recovered from plasma (81.8 +/- 6.8%) by liquid-liquid extraction. The mobile phase flow rate was 0.3 mL/min and consisted of methanol:water:formic acid (90:10:0.1, v/v/v). The analytical column (4.6 x 100 mm) was packed with Partisil C(8) (5 micro m). The standard curve was linear from 0.7 to 70.4 ng/mL (r(2) > 0.99). The lower limit of quantitation was 0.7 ng/mL. The assay was specific, accurate (percentage deviation from nominal concentrations were <15%), precise and reproducible (within- and between-day coefficients of variation <10.3%). Sumatriptan in plasma was stable over three freeze/thaw cycles and at room temperature for one day. The utility of the assay was demonstrated by following sumatriptan plasma concentrations in two healthy subjects for 8-12 h following a single 20 mg intranasal dose.     

Direct alkenylation of arylamines at the ortho-position with magnesium alkylidene carbenoids and some theoretical studies of the reactions

1-Chlorovinyl p-tolyl sulfoxides were synthesized from ketones and chloromethyl p-tolyl sulfoxide in high yields. Treatment of the sulfoxides with isopropylmagnesium chloride at −78 °C in toluene gave magnesium alkylidene carbenoids (α-chloro alkenylmagnesium chlorides), which were treated with N-lithio arylamines to afford ortho-alkenylated arylamines in moderate yields. The reaction, in some cases, proceeded in a highly stereospecific manner at the carbon bearing the chlorine and the sulfinyl group. The structures of the α-chloro alkenylmagnesium chlorides and the reactivity of the N-lithio meta-substituted anilines were studied at the B3LYP and MP2 levels of theory with the 6-31(+)G* basis set. This reaction offers a quite novel and direct alkenylation of arylamines at the ortho-position of the aromatic ring.     

Electronic state of Fe used as Mössbauer probe in the perovskites LaMO3 (M=Ni and Cu)

For the first time a comparative study of rhombohedral LaNiO₃ and LaCuO₃ oxides, using ⁵⁷Fe Mössbauer probe spectroscopy (1% atomic rate), has been carried out. In spite of the fact that both oxides are characterized by similar crystal structure and metallic properties, the behavior of ⁵⁷Fe probe atoms in such lattices appears essentially different. In the case of LaNi_0.99Fe_0.01O₃, the observed isomer shift (δ) value corresponds to Fe³⁺ (3d⁵) cations in high-spin state located in an oxygen octahedral surrounding. In contrast, for the LaCu_0.99Fe_0.01O₃, the obtained δ value is comparable to that characterizing the formally tetravalent high-spin Fe⁴⁺(3d⁴) cations in octahedral coordination within Fe(IV) perovskite-like ferrates. To explain such a difference, an approach based on the qualitative energy diagrams analysis and the calculations within the cluster configuration interaction method have been developed. It was shown that in the case of LaNi_0.99Fe_0.01O₃, electronic state of nickel is dominated by the d⁷ configuration corresponding to the formal ionic “Ni³⁺-O²⁻” state. On the other hand, in the case of LaCu_0.99Fe_0.01O₃ a large amount of charge is transferred via Cu-O bonds from the O:2p bands to the Cu:3d orbitals and the ground state is dominated by the d⁹L configuration (“Cu²⁺−O” state). The dominant d⁹L ground state for the (CuO₆) sublattice induces in the environment of the ⁵⁷Fe probe cations a charge transfer Fe³⁺+O⁻(L)→Fe⁴⁺+O²⁻, which transforms “Fe³⁺” into “Fe⁴⁺” state. The analysis of the isomer shift value for the formally “Fe⁴⁺” ions in perovskite-like oxides clearly proved a drastic influence of the 4s iron orbitals population on the Fe−O bonds character.